Category：Environmental friendly stabilizers for soft PVC
|Recommended Dosage||4 ～6 phr|
|Application Scope||Dark wires and cables (low-temperature plasticization)|
|Technical Index||Appearance||White or yellowish powder, or granules|
|Loss on Heating (%)||≤2.5|
|Initial Melting Point (℃)||≥60|
A) Can entirely replace lead and organotin stabilizers. Satisfies non-toxic environmental and sanitary requirements.
B) Provides the product with excellent initial color clarity and heat stability; anti-sulfide pollution.
C) Congo-red time (200℃) longer than 60 mins, good plastic fluidity.
D) Can make the PVC compound with uniform plasticization and with high-speed melt fluidity and make even and smooth surface.
E) Excellent synergistic reaction in working with epoxidized soybean oil.
|Security||Compliance with EU RoHS & REACH and other standards.|
|Transport and Storage||Keep away from sunlight and moisture.|
|Notice||The technical information of this specification was obtained through tests and actual using process. However, the specific dosage when using should be in accordance with the formula, equipment and process, etc.|